Now you can repair cracks and spalls to a smooth finish in a fraction of the time it takes with ordinary products. The Roadware 10 Minute Concrete Mender™ is a revolutionary new two-part hybrid urethane for repairing concrete. It's nearly water thin for deep penetration and it won't pop out like epoxy because it never gets brittle.
The Roadware 10 Minute Concrete Mender™ is packaged in uniquely designed ratio-packs that allows you to completely mix the material only at the point of application. There would not be any pot-mixing and hence no unused material. Difficult repairs are now simple, just clean the area, prime with 10 Minute Concrete Mender, add manufactured sand, and flood with additional 10 Minute Concrete Mender™. In 10 minutes you'll get a tough 4500 psi polymer concrete that will stay in place permanently.
The Roadware 10 Minute Concrete Mender™ is extremely tough and will withstand even the harshest punishment. It is great for cold room and freezer environments, as it may be applied at temperatures as low as -7° Celcius with excellent results. With high chemical resistance, it is perfect for containment areas. It will accept primers and industrial coatings in just 10 minutes after application. Now prep-work and coatings can be applied in the same day!
The Roadware 10 Minute Concrete Mender™ is a two-part polyurethane that penetrates deep into concrete to make permanent repairs. At only 8.6 cps, Concrete Mender actually injects itself into the matrix of the concrete and shores up the existing concrete as well as making the repair. Concrete Mender eliminates the bond line and seeps into the concrete.
VNA Grinder Pte Ltd is the Master Distributor of Roadware 10min Concrete Mender™ in Singapore. At the same time, we also carry a range of other concrete solution products from Roadware Incorporated. Contact us for a no-obligation floor accessment now or simply to find out more about our products!